无套进入内谢11p视频a片,成人综合网,日日操,又黄又爽又色又刺激的视频

Tele Aluminum Housing Workpiece

Suitable for removing oil from aluminum alloy wheel raw parts after polishing and wax removal.

1. SF-8102 is an efficient degreasing powder designed specifically for aluminum alloys, and can also be used for degreasing zinc and brass, and other alloys;

2. This product has strong removal ability for animal and vegetable oils;

3. This product is made from efficient and special surfactants, penetrants, chelating agents, detergents, and anti-corrosion agents, and will not corrode workpieces;

4.  This product does not contain carcinogenic substances such as nitrite and is safe to use.

Tele Aluminum Housing Production Line 1

Suitable for weak alkaline etching on aluminum alloy surfaces, and can also be used for degreasing iron parts, copper alloys, and brass parts.

1. SF-8507 is a strong alkaline descaling powder with strong descaling, rust removal, oxide film removal, and even coating removal capabilities;

2.  SF-8507 can be used for weak etching of aluminum alloys surfaces to obtain an ideal surface state for good adhesion between the substrate and subsequent coatings.

Deep Hole Workpiece

Suitable for acid corrosion of aluminum alloys to remove ash and scale on the substrate surfaces.

1. SF-508 is an excellent acidic descaling solution for aluminum alloys, providing a uniform and dense substrate surface for subsequent plating;

2. It can obtain a good coating adhesion;

3.  Low NOx gas release during operation, beneficial for environment.

Complicated Workpiece

Used for zinc deposition on aluminum alloy parts before plating, especially suitable for zinc deposition on aluminum alloy cavities before plating.

SF-8300 Cyanide-free Zinc deposition Agent can produce a uniform and dense zinc deposition layer on the aluminum alloy surface, providing good adhesion for subsequent processes such as direct copper plating, nickel plating, tin plating, electroless nickel deposition, etc. The solution does not contain harmful substances such as cyanide, and the complex can biodegrade, which is suitable for plating aluminum alloy cavities.

Tele Aluminum Housing Production Line 2

Used for electroless nickel treatment before plating on aluminum alloys. Specially formulated to remove a small amount of zinc from aluminum. This aluminum alloy with only a thin zinc barrier layer can prevent re-oxidation.

Used to replace cyanide flash copper plating on aluminum after zinc deposition. This process can reduce the need for cyanide and significantly improve the coverage of the flash coating.

1. SF-811 Alkaline Pre-plating Electroless Nickel is a chemical flash nickel plating solution. This alkaline electroless nickel process can deposit a very thin, uniform, and active nickel coating, which can be used for electroless nickel or electroless copper plating and bright nickel plating with good adhesion.

2. As part of the double-layer barrier layer system, the SF-811 process is the second part of the two-step process of zinc plating and nickel double-layer barriers on aluminum alloys before electroless nickel plating. The first step is to plate a Zinc layer on the clean and deoxidized aluminum surface. This layer of zinc prevents aluminum from re-oxidizing, ensuring good adhesion of the final plating layer.

3.  SF-811 Alkaline Pre-plating Electroless Nickel is supplied in four concentrated liquids: SF-811A Alkaline Pre-plating Electroless Nickel Make-up Agent and SF-811C Alkaline Pre-plating Electroless Nickel Reducing Agent for make-up agents; SF-811B Alkaline Pre-plating Electroless Nickel replenisher and SF-811C Alkaline Pre-plating Electroless Nickel Reducing Agent for replenishment. SF-811D Alkaline Pre-plating Electroless Nickel Stabilizer is an additive for the SF-811 Alkaline Pre-plating Electroless Nickel barrier layer. It is used when higher stability of the working solution is required, especially when SF-811 Alkaline Pre-plating Electroless Nickel is not used regularly, and will help prevent metal precipitation and spontaneous decomposition.

Tele Aluminum Housing Workpiece

Suitable for base plating layer of brass, iron, and aluminum parts; strike coating, backing of zinc alloy die-castings; and as pre-copper plating layer of nickel and acid copper coatings.

1. This process has excellent dispersion and coverage performance, especially in the low current density range, with excellent dispersion performance;

2. It can be directly plated on the surface of zinc alloy parts in the form of rack plating;

3. It can obtain pore-free, dense, fine, smooth, and soft copper plating layer with excellent adhesion;

4.  It does not contain cyanide and strong chelating agents, and the wastewater treatment is simple.

Tele Aluminum Housing Production Line

Suitable for thickening the coatings of aluminum alloy cavities, zinc alloy die-castings, copper and iron stampings, ABS plastic parts after copper plating.

The plating solution is slightly alkaline and has excellent deep plating ability, especially suitable for complex shaped zinc die-casting parts;

The plating solution does not contain harmful cyanides;

The coating is bright and smooth, with a wide current density range;

Before copper pyrophosphate plating on zinc die castings, a layer of cyanide copper should be coated to prevent displacement reaction.

Through SEM images, the silver layer obtained from SF-950 Cyanide-free Silver Plating reaches the nanometer level, with finer crystallization than cyanide silver plating.

Can be directly used for brass, copper, electroless nickel and other workpieces, without pre-plating silver. Suitable for both barrel and rack plating.

SF-950 is a cyanide-free alkaline silver-plating process with excellent adhesion between coatings and workpieces, and can be directly used for copper, brass, electroless nickel and other workpieces. The silver deposit has excellent conductivity and weldability, a bright and beautiful appearance, harmless to the human body, and has good decorative properties. This process does not contain harmful substances such as Se, Te, and their compounds, meeting current environmental requirements.

Tele Aluminum Housing Workpiece

SF-960 Silver Protective Agent is a water-soluble silver protectant that can effectively prevent oxidation and discoloration of silver and silver alloys. The thickness of the monolayer protective layer formed by silver protectant is 0.5-1.5 nanometers, which does not affect the surface conductivity and welding performance. The protective layer is non-toxic and harmless. The protective layer formed on the surface of silver will greatly improve its anti-sulfurization and wear resistance.

1. Simple process operation. By immersing the workpiece in the working solution, a chemical reaction can occur to form an effective protective film.

2. The process does not contain organic solvents, and the formed protective layer is non-toxic and non-irritating, improving safety and environmental protection.

3. The protective layer hardly changes the contact resistance and weldability of the silver layer.

4. A short-term heat treatment (below 300℃) has little effect on the performance of the protective layer.

5. Can be rinsed with water.

6.  Long tank solution life, better anti-sulfurization and wear resistance.

Tele Aluminum Housing: Finished Product

Can meet the plating requirements of various complex parts, suitable for both barrel plating and rack plating.

The silver white coating is bright and uniform, with good ductility. Even after long-term storage, it still has good solderability and anti-discoloration performance;

The bright range of the plating solution is wide, and the coating ability and leveling performance are excellent;

The plating solution is stable, easy to control, and can meet the requirements of high-strength continuous operation. The plating solution will not become turbid and does not require additional stabilizers;

Low consumption, fast brightening speed, high current efficiency, and significant economic benefits.